Asus Eee Pc 1005ha Ram Aufrüsten

Download Article

Practise you want to get a niggling more out of your Asus Eee PC? Upgrade that stock 512MB memory module with a 1 or 2GB module.

Hither'south a quick and easy guide on how to upgrade the retentivity inside your 700 series (4G or 8G) Eee PC.

1

Purchase the correct retentivity. Search for standard, DDR2 laptop memory modules (not desktop memory), which will have 200-pivot edge connectors. Select either a 1GB or 2GB DDR2 memory module of either 533 or 667MHz speeds. These may be referenced as PC-4200 or PC-5300, respectively. Recommended brands include, but are not limited to, Kingston, Corsair, Patriot, and Viking.
two

Power off your Eee PC if information technology's on. Also, unplug the AC ability adapter.

Advertisement
iii

Gear up your Eee PC by placing it upside-down on a apartment surface with some form of padding. Keep the forepart of the laptop facing you. The Eee PC will need to rest on its height embrace to supervene upon the retentiveness, so utilise a not-abrasive surface. For case, an over-sized mouse pad on your desk-bound, a big piece of foam, or a clean, carpeted flooring will work. Be sure to ground yourself or some surfaces may cause static to brusk a component.
4
Remove the battery. This will prevent you from accidentally shorting anything on the organization lath during this process. To remove the battery:
1. Apply your left thumb to printing and concord the left-well-nigh battery lock switch to the unlock position.
2. Use your right hand to click over the correct-most battery lock switch to the unlock position.
3. Utilize your right hand to gently push button the battery away from the laptop. Push button a little at a time, alternating on each side. Newer Eee PCs and batteries may be a piddling tight at first.
5
Open the retention cover on the dorsum of the Eee PC.
1. If it exists, remove the Eee PC sticker covering i screw.
2. Completely loosen both screws with a Phillips #0 jeweler's screwdriver.
3. Remove the screws with your fingers and set them aside.
4. Utilize your finger and/or fingernail to pull upward at the front of the cover. In that location should be a small slot here in the example to requite yous room to pry information technology open up.
5. Keep pulling until the cover clicks open, then set information technology bated for now.
6
Remove the existing module. This should exist towards the front of the laptop, with empty space towards the back. Information technology is held in with two metal clips on each side.
1. Use both of your thumbnails at the same time to press outward on the clips. The module volition have a mild spring-loaded feeling to it. When the clips have been completely depressed on both sides, the module will push button itself upward at an bending.
2. Once the module is free of the clips, gently grasp the edge of it and pull out along the same angle in which information technology is resting. This is approximately a fifteen to 25 degree angle to the laptop.
3. Put the module aside, in a safe, static-gratuitous location.
7

Unwrap the new module from its packaging. About memory will be sold in a piece of hard, articulate plastic. Gently remove it from the packaging past pressing on it from the plastic side. Avoid bending the module or applying also much force to the packaging.
8
Install the new module. Use your removal process as a guide in reverse for this installation.
1. At the same angle as before, insert the new retentiveness module into the laptop's memory slot. Brand certain information technology fits all the way downward until the contacts are either no longer visible, or hard to meet. This requires almost no force, and then be gentle.
2. Press down on the module to marshal it so that it is parallel with the laptop. The retention slot clips will click close when the module is fully seated.
ix
Verify the memory is recognized by your Eee PC. Earlier closing up the retention cover, it is helpful to verify the memory is recognized by your laptop and its operating arrangement.
1. Gently re-insert the battery
2. Flip over the laptop and ability it on.
3. With Xandros — the default Linux distribution — click on the "Settings" tab.
4. Click on "System info" and verify "Retentiveness size" reports "1024 MB" (1GB).
5. For 2GB modules, click on "Diagnostic Tools" instead and verify "* RAM Size" reports "2048 MB" (2GB).
10

Replace the memory cover by snapping it into place and reinserting the screws. If yous've installed 2GB of RAM into an Eee PC running the default Xandros Linux operating system, now is the fourth dimension to rebuild the kernel. This volition go it to recognize the total 2GB of system memory.
11

Get your Xandros operating arrangement to utilize 2GB of memory. Go along with the "Install a New Kernel" section beneath for instructions.

If you take Xandros:

one

Create a "Rescue Mode" for Xandros. This is a user-friendly style to boot your Eee PC into a root privilege, command-line way that will allow you lot to change organisation files. It is crucial to performing the following steps.
ii

Download a pre-compiled kernel for the Eee PC's special Xandros distribution that supports 2GB of retentiveness.
iii
Save and rename the downloaded file. It should be saved to your home binder, which is typically /dwelling house/user/. Rename the file to something advisable (ie: vmlinuz-two.half dozen.21.4-eeepc-2GB):
1. From the "Work" tab, open the "File Director".
2. Brand sure "My Dwelling house" is selected, then click on the downloaded file once to highlight information technology.
3. Press F2 to rename the file, and then press ↵ Enter when washed.
iv

Restart your Eee PC. Make certain you lot enter the "Rescue Style" this fourth dimension. Repeatedly press F9 after seeing the start screen, then select "Rescue Mode" or the name you selected in the start step.
five

Blazon these commands at the pound # sign prompt, pressing ↵ Enter later each i. Recall to use the file name you lot selected for the last control:

mount /dev/sda1 mnt-system
mountain /dev/sda2 mnt-user
cp /mnt-user/dwelling house/user/vmlinuz-two.vi.21.4-eeepc-2GB /mnt-organisation/boot
6

Launch half-dozen to edit the grub boot loader menu to add a new entry for this kernel. Blazon the following command and press ↵ Enter after information technology:

vi /mnt-organisation/boot/grub/card.lst
7
Use vi to add your new entry. The vi editor is not intuitive for those familiar with more graphical editors such as Notepad, Wordpad, or Word on Microsoft Windows. It is very powerful, but at the aforementioned time, very complicated and difficult to learn. For now, follow the steps below to edit this file.
1. Utilize the cursor keys to motility down to the starting time entry (paragraph) for "Normal Boot". Place the cursor on the outset line of this section.
2. Copy the department by using the following keystrokes. This will copy five lines from where the cursor is located: v Y Y
3. Move the cursor down below this department to the next bare line. Paste our previously copied text by using: P
4. For the line of this new entry starting with "kernel" (ie: kernel /kicking/vmlinuz-ii.six.21.iv-eeepc repose rw vga=785 irqpoll root=/dev/sda1), change the zmlinuz name here to our new kernel file's name. For example:
  kernel /boot/vmlinuz-ii.half-dozen.21.4-eeepc-2GB quiet rw vga785 irqpoll root=/dev/sda1
  
  To do this, press I to switch half-dozen into insert mode, move the cursor to this location, and insert text. To remove text, apply ← Backspace only; practise not utilize Delete .
5. Rename the title of this new entry to anything you desire.
6. It is appropriate at this point to change both your "fallback", "timeout", and "default" values. Each option (paragraph department) is reference by the guild they're listed. The showtime one is 0, the second one is one, third one is 2, etc. Fix your default to the new entry you added (ie: 1), the fallback to the Normal Kicking entry (ie: 0), and the timeout in seconds to v or any value of your preference. The timeout is how long the grub kicking carte du jour will announced until information technology automatically makes the default selection for you.
7. If desired, add a pound # sign in front end of the line that had "hiddenmenu" to brand sure the menu is shown each time you boot. Otherwise, you'll accept to keep pressing F9 when the organization boots to get dorsum into this menu.
8. To get out of half dozen'south insert way, and back into command way, press Esc .
9. Save your file past pressing :+W+Q . To exit vi without saving, printing :+Q+! .
8

Reboot the PC when back at the command prompt. Do this past pressing Ctrl+D twice (possibly 3 times) until you either run across a bulletin that states "Printing [Enter] to restart", or the until the Eee PC restarts on its own. If you followed all of the examples above, the default boot selection should be the new kernel.
nine

Exam the new kernel by clicking on the "Settings" tab and launching "System info" once Xandros boots to the desktop. The system should written report 2048 MB for the "Retentivity size".

Add together New Question

Question

Can Windows 7 be installed on these computers?

Yep, Windows tin can be installed on your Asus PC.

Enquire a Question

200 characters left

Include your electronic mail address to become a bulletin when this question is answered.

Submit

Video

The steps above for verifying memory on an Eee PC with Microsoft Windows XP installed by default will vary. Open "Start" -> "Command Panel" -> "System" to verify that your new memory is recognized.
Upgrading to 2GB is simply possible with a rebuild of the Xandros Linux kernel. The default install of Xandros will only recognize a maximum of 1GB of RAM.
Use the packaging of your new retention module to store the existing, stock 512MB module.

Testify More Tips

Thanks for submitting a tip for review!

Advertizement

This will non work on the Eee PC 2G Surf. This low-end model does not take any memory slots. Instead, the RAM is soldered to the system board. It is possible to solder in additional memory, as the system board will recognize larger-sized memory. This type of upgrade is only for die-hard modders who don't listen voiding their Asus warranties and risking damage to their Eee PC.
Make sure the RAM is in very tightly. If not, a knock or bump to the laptop may loosen it for a 2nd, which has the potential to corrupt files and damage the retention module. Even if the retentiveness retention clips click when the module is inserted, this isn't a guarantee that the module is inserted all the fashion.
Carpets are known for creating static electricity, so be very cautious if you take chosen to work on the floor. If you decided to piece of work hither, using a grounding wrist strap is recommended.
Do not force annihilation. Every step within this process requires a lite touch and minimal strength.

Things You'll Need

Asus Eee PC, models 4G Surf, 4G, or 8G ($350 to $500 USD)
1 or 2GB, DDR2-667 or DDR2-533, memory module, of whatever latency ($35 to $40 USD)
Phillips #0 screwdriver (jeweler'south screwdriver)

Most This Article

Cheers to all authors for creating a folio that has been read 379,975 times.

Is this article up to date?